2,9 kW (3,9 KM) elektromotor 3 x 400 V
Robusten varjeni jekleni okvir
4 nastavljive spone za vpenjanje materiala
8 nastavljivih izravnalnih nog za nastavitev višine mize od 76 do 83 cm
Nastavljiva globina reza od 0,40 mm do 3,17 mm
Nadzorna plošča omogoča spreminjati hitrost premika in stikalo za vklop/izklop
Krmiljenje smeri ročnega premika ali pogonske glave s spremenljivo hitrostjo premika
Dvoverižni premični sistem
Standardna odprtina za prah 101,6 mm
Orbitalna brusilna glava (glava z naključnim premikanjem brusilnika z ježki)
Rezalna glava vključuje pet 4-stranskih karbidnih nožev
Modularni odseki za mizo za enostavno pošiljanje in razširitev
The SlabMizer MB200 Slab Flattener efficiently surfaces and flattens wood slabs, boards, burls, cookies, and other wide material with minimal labor. Compared to a traditional router or planer, the SlabMizer flattens wider and thicker material in less time using powered cutter head directional controls with variable feed speed. For larger capacity, 1520 mm table extensions can be added to extend the material length.
Material is secured on the heavy duty, welded steel frame by 4 adjustable clamps. To adjust the cutting depth, a hand crank located on the top of the cutter head is adjusted from 0,40 mm to 3,17 mm in 0,40 mm increments.
The cutter head is engaged and operated by a powered control console that can be used from any side of the machine or detached from the stand for handheld use. Powered controls include on/off, variable feed speed, and a joystick direction control for the X and Y axis for finishing material with or against the grain.
The cutter head can also be operated manually with a handle. Once both sides of the slab are surfaced, fine finishing is accomplished by using the 177 mm orbital sanding head attachment for the desired finish. Dust from the operation is easily removed with a 1016 mm diameter extraction port on top of the cutter head that can be connected to a dust extraction system.